model | GSD-33100 | GSD-33125 | GSD-33150 | GSD-33175 | G SD-33200 | GSD-33250 | GSD-33300 | |||
Rated capacity | 100KVA | 125KVA | 150KVA | 175KVA | 200KVA | 250KVA | 300KVA | |||
communication input | Wiring mode | three-phase | ||||||||
Rated voltage | 220V/380V | |||||||||
Voltage stabilizing range | ± 18% (± 25% option) | |||||||||
frequency | 47Hz_63Hz | |||||||||
power factor | 0.95~1 | |||||||||
communication input | Wiring mode | three-phase | ||||||||
Rated voltage | 220V/380V | |||||||||
frequency | Same as input frequency | |||||||||
power factor | ± 0.7-1 (applicable range of load power factor) | |||||||||
efficiency | ≥ 98% (at full load) / no-load consumption rate ≤ 2% | |||||||||
Voltage stabilizing rate of power supply | ±1% ~ ±2% | |||||||||
load regulation | ±1% ~ ±2% | |||||||||
Waveform distortion（THD ) | Additional distortion<1% | |||||||||
reaction time | <4m s/S tep （set up） | |||||||||
instructions | LCD | English LCD, which can display various electrical parameters, control status and recorded information | ||||||||
indicator light | Abnormal power supply, output voltage out of limit (high voltage / low voltage), automatic bypass power supply | |||||||||
protect function | Exceeding the voltage stabilizing range | Automatic power off (option), LED indication | ||||||||
overload | 150% can be maintained for 15 s, 130% can be maintained for 30 s, and 110% can be maintained for 300 s (overload to bypass is irreversible) | |||||||||
Automatic bypass | LED indication and alarm | |||||||||
Pro message elimination | Surge absorber, L C filter, e m I filter | |||||||||
Overvoltage / undervoltage protection | Alarm and automatic cut-off (option) | |||||||||
Under phase / reverse phase protection | Alarm and automatic cut-off (option) | |||||||||
user interface | Operation interface | English LCD, keypad, light indicator | ||||||||
Alarm function | Alarm I and alarm II (provide output node) | |||||||||
Communication interface | Photoelectric isolation rs-4852400bps, self defined communication protocol | |||||||||
Background monitoring software | Remote signaling, telemetry and remote control functions | |||||||||
Overload capacity | 200% for 10 seconds and 500% for 50 seconds | |||||||||
Noise (1m away from the machine) | ≤58dB | |||||||||
Cooling mode | Fan cooling | |||||||||
Input / output connection mode | Terminal strip | Copper bar | ||||||||
environment | Temperature 0 ℃ - 40 ℃, relative humidity 0-95% (non condensing state) | |||||||||
